Tab Tool


Standard fork sizes available are for 1.5-inch-thick rails and 2-inch-thick rails. A custom size option is available in the pick list below.

The fork can be purchased with or without a 46-inch handle. Ordering without a handle allows you to customize your tool with a handle that best fits your needs. A standard painter’s pole or mop handle from your local store or one you already have on hand will work if they have ¾ -5 threads per inch, Acme thread. (***The Acme thread end is about the size of a dime and a nickel will fit lose between the threads).

Handle Coins

Your own handle should have strong threads and material with a diameter not bigger than 1-inch. Otherwise, it interferes with the Fence Rail Fork setting against the fence post. Additionally, telescoping handles must lock in place to be able to withstand the force of pushing the Tab Tool on the rail.

*For orders over 10 items, please contact us for shipping options

See Size Chart



Need a handle? A 46-inch standard handle.

The standard handle length of 46-inches plus the fork size is good for fences where the bottom of the lowest rail is not more than 54-inches from the top of the fence post. See Size Chart

The handle length totals 72-inches plus the fork size is good for most 6-foot fences. Sending anything longer than 46-inches doubles the shipping cost.

Additional information


1.5 inch, 1.75 inch, 2 inch, Custom Size

This entry was posted on Tuesday, December 8th, 2020 at 10:19 am. Both comments and pings are currently closed.